FITTINGS & FLANGES
Carbon steel eccentric reducer
ECC Reducer · WPB · SCH40
- Dimensional series
- ASME B16.9
- Material configuration
- ASTM A234 WPB
- End connection
- Butt weld (BW)
- Wall series
- SCH40 for listed rows
- Design pressure
- To be specified for material, wall and service conditions
- Type
- Eccentric
Confirm configuration, price, quantity and lead time for each enquiry.
Reducer · selected SCH40 dimensions
Units: mm; NPS in inches
| NPS large × small | Large end OD | Large T | Small end OD | Small T | Length L | Schedule |
|---|---|---|---|---|---|---|
| 3/4 × 1/2 | 26.7 | 2.87 | 21.3 | 2.77 | 38 | 40 |
| 1 × 3/4 | 33.4 | 3.38 | 26.7 | 2.87 | 51 | 40 |
| 1 1/2 × 1 | 48.3 | 3.68 | 33.4 | 3.38 | 64 | 40 |
| 2 × 1 1/2 | 60.3 | 3.91 | 48.3 | 3.68 | 76 | 40 |
| 2 1/2 × 2 | 73.0 | 5.16 | 60.3 | 3.91 | 89 | 40 |
| 3 × 2 | 88.9 | 5.49 | 60.3 | 3.91 | 89 | 40 |
| 4 × 3 | 114.3 | 6.02 | 88.9 | 5.49 | 102 | 40 |
| 4 × 2 | 114.3 | 6.02 | 60.3 | 3.91 | 102 | 40 |
The catalogue provides this dimensional series for both concentric and eccentric reducers. Select the required alignment in the enquiry. Nominal dimensions; confirm tolerances and standard edition.
Specifications compiled from available product documents，Document page: 62。Dimensions, performance and suitability are subject to confirmed drawings and ordering documents.
← Back to Reducer series