FITTINGS & FLANGES
Flexible rubber joint
JGD-1 / JGD-2 / JGD-3
- Inner/outer rubber alternatives
- NR / NBR / EPDM
- Flange material
- Q235
- JGD-1 pressure and size
- 1.0 MPa; DN32–DN1200
- JGD-2 pressure and size
- 1.6 MPa; DN32–DN300
- JGD-3 pressure and size
- 2.5 MPa; DN32–DN300
- Standard / special temperature
- −15°C to +115°C; special conditions −30°C to +250°C
Confirm configuration, price, quantity and lead time for each enquiry.
Complete JGD dimension/displacement table. DN above 300 is only listed for JGD-1 at 1.0 MPa.
Units: mm; inch; degrees
| DN | Inch | Length L | Axial extension | Axial compression | Lateral displacement | Deflection angle |
|---|---|---|---|---|---|---|
| 32 | 1 1/4 | 95 | 6 | 9 | 9 | 15° |
| 40 | 1 1/2 | 95 | 6 | 10 | 9 | 15° |
| 50 | 2 | 105 | 7 | 10 | 10 | 15° |
| 65 | 2 1/2 | 115 | 7 | 13 | 11 | 15° |
| 80 | 3 | 135 | 8 | 15 | 12 | 15° |
| 100 | 4 | 150 | 10 | 19 | 13 | 15° |
| 125 | 5 | 165 | 12 | 19 | 13 | 15° |
| 150 | 6 | 180 | 12 | 20 | 14 | 15° |
| 200 | 8 | 210 | 16 | 25 | 22 | 15° |
| 250 | 10 | 230 | 16 | 25 | 22 | 15° |
| 300 | 12 | 245 | 16 | 25 | 22 | 15° |
| 350 | 14 | 255 | 16 | 25 | 22 | 15° |
| 400 | 16 | 255 | 16 | 25 | 22 | 15° |
| 450 | 18 | 255 | 16 | 25 | 22 | 15° |
| 500 | 20 | 255 | 16 | 25 | 22 | 15° |
| 600 | 24 | 260 | 16 | 25 | 22 | 15° |
| 700 | 28 | 260 | 16 | 25 | 22 | 15° |
| 800 | 32 | 260 | 16 | 25 | 22 | 15° |
| 900 | 36 | 260 | 16 | 25 | 22 | 15° |
| 1000 | 40 | 260 | 18 | 26 | 24 | 15° |
| 1200 | 48 | 260 | 18 | 26 | 24 | 15° |
Specifications compiled from available product documents，Document page: BD 245。Dimensions, performance and suitability are subject to confirmed drawings and ordering documents.
← Back to Dismantling & Expansion Joints range