2PC full-bore male × female ball valve with butterfly handle
30-0A112
A two-piece, full-bore ball valve with one male and one female threaded end and a compact butterfly handle. Check its eight-size dimension table and material configurations, then specify the required thread, service conditions and quantity.
- Model / form
- 30-0A112 · 2PC M-F butterfly handle
- Connection
- Male × female threaded ends
- Body / bore
- Two-piece body; full bore
- Size range
- 1/4–2 in (source nominal DN8–DN50)
- Pressure designation
- 1000 PSI; pressure-temperature limits for the selected configuration require confirmation
- Body / bonnet configurations
- CF8 or CF8M
- Ball / stem configurations
- F304 with the CF8 configuration; F316 with the CF8M configuration
- Seat choices in source
- PTFE / PTFE+20%CF for the CF8 column; CF8M seat compound TBC
- Seat-specific temperature ranges listed
- PTFE: −40 to120°C; PTFE+20%CF: −40 to200°C; simultaneous pressure limits TBC
- Thread alternatives
- ASME B1.20.1 / BS21 / DIN2999 / BS EN10226 / JIS B0203 / ISO7-1 / ISO228-1; select the exact thread and edition
- Design reference
- API608; face-to-face MFR STD as listed
- Inspection references
- API598 / EN12266-1; ordered acceptance requirements TBC
- Operation
- Manual butterfly handle
- General media listed
- Water / oil / gas; material compatibility depends on the actual medium
Confirm configuration, price, quantity and lead time for each enquiry.
Some service conditions or material combinations require confirmation. Provide the medium, working temperature and pressure; order against the final technical confirmation.
Dimensions
Units: Size in inch; Ød/L/H/E in mm as explicitly stated by the source
| Size | Ød (mm) | L (mm) | H (mm) | E (mm) |
|---|---|---|---|---|
| 1/4" | 11 | 64 | 50 | 27.5 |
| 3/8" | 12.5 | 65 | 50 | 27.5 |
| 1/2" | 15 | 71 | 55 | 30 |
| 3/4" | 20 | 80 | 59 | 30 |
| 1" | 25 | 93 | 72 | 37.5 |
| 1-1/4" | 32 | 108 | 76.5 | 37.5 |
| 1-1/2" | 38 | 116 | 93.5 | 52.5 |
| 2" | 50 | 140 | 108 | 52.5 |
Model30-0A112 only. Preserve E exactly as shown in the original section drawing: E is dimensioned on each side of the stem centre. The webpage description calls E handle width, so confirm the overall handle span and swept installation envelope before order; do not assume E is the full width.
Main parts and material configurations
| No. | Part | CF8 configuration | CF8M configuration |
|---|---|---|---|
| 1 | Body | CF8 | CF8M |
| 2 | Bonnet | CF8 | CF8M |
| 3 | Ball | F304 | F316 |
| 4 | Stem | F304 | F316 |
| 5 | Seat | PTFE / PTFE+20%CF | TBC |
| 6 | Bonnet Gasket | PTFE / PTFE+20%CF | TBC |
| 7 | Thrust Washer | PTFE+15%GF / PTFE+20%CF | TBC |
| 8 | Packing Washer | PTFE / PTFE+20%CF | TBC |
| 9 | Packing Gland | F304 | TBC |
| 10 | Spring Washer | SS304 | TBC |
| 11 | Nut | A2-70 | TBC |
| 12 | Handle | 201 | 304 |
| 13 | Handle Cover | PVC | TBC |
The dash cells in the original CF8M column are unconfirmed and shown as TBC; material is not inferred from the adjacent CF8 column. Confirm the ordered seat, gasket and packing compounds and complete bill of materials.
Selection questions
Does this valve have female threads at both ends?
This model is male × female: one external-thread end and one internal-thread end. Select the mating thread type and size for the order.
What should I confirm for installation clearance?
Check L, H and the original E dimensions. Confirm the complete butterfly-handle span and swept envelope because the source drawing labels E separately on both sides.
Specifications compiled from available product documents。Dimensions, performance and suitability are subject to confirmed drawings and ordering documents.
← Back to Ball Valves range